Description
Features
- Speed upto 35,000 RPM.
- Forward & reverse direction selection.
- Hand & foot operation.
- Extra torque for smooth working.
- Low heat generation suitable for long use.
- No noise & vibrations.
Description
Waldent Clinical Micromotor is designed to facilitate more user-comfortability for the professional and a significant reduction in procedural times for their patients.
- Waldent Clinical Micromotor used for hard tissue trimming (teeth, bone).
- It is also used in denture trimming polishing of prosthesis.
INDICATION : A dental drill or handpiece is a hand-held, a mechanical instrument used to perform a variety of common dental procedures including removing decay, polishing fillings, and altering prosthesis.
ADVANTAGES :
- High-powered 35,000 rpm.
- Non-stage speed system (it’s well designed to output from zero to 35,000rpm by using a non-stage speed system).
- Right & Left turning ability.
- Foot ON/OFF switch system.
- Compact and portable size
- Continous variable speed control
- One- touch change of the driving direction for efficient operation
- No noise
Key Specifications
COMPOSITION:
- Made up of high-quality Stainless steel material.
TECHNICAL SPECIFICATION
- Max Speed – 35,000 rpm
- Torque – 2.9 Ncm
- Input – 100,110/220, 240V (50/60 Hz)
- Output – 32V
- Connection – E type
Packaging
- 1 x Micromotor with Cord
- 1 x Control Box
- 1 x Foot Pedal
- 1 x Stand
Direction to Use
- Check that the power switch is set to an OFF position.
- Confirm adequate power line voltage (100V to 240V).
- Connect the power supply to the electrical mains.
- Connect the power cord to the EndoStation by inserting the connector into the receptacle on the rear aspect of the device. Make sure the power cord is well-fitted.
- Place the footswitch properly to allow easy operation.
- Connect the footswitch cord into the receptacle at the front panel of the device.
- Pay attention to align the plug with its receptacle.
- Plug the micromotor cord to the device.
- Pay attention to align the plug with its receptacle.
- Plug the E-type contra-angle handpiece onto the micromotor and the handpiece head to the handpiece, if applicable.
Reviews
There are no reviews yet.